How to Build Z-scale Ranch House No. 1 kit pt 8
A Tutorial by Paw of a Bear

Previous page: Part 7 - More Trim and Shingles

Glazing and Window Treatments

Apply white glue around the inside of the window openings one at a time. Allow the glue to get a little tacky.

Gluing the Window Glazing in Place for the Z-scale Ranch House No. 1 Kit.

Then drop the appropriate glazing in place using a pair of a tweezers.

Gluing the Window Glazing in Place for the Z-scale Ranch House No. 1 Kit.

If you like, you can leave the protective paper on and remove it after the glue as dried. Be sure to keep the glazing side to the window. You don't want tissue paper glued to your windows.

Gluing the Window Glazing in Place for the Z-scale Ranch House No. 1 Kit.

Now use markers or colored pencils to snazz up your drapes or leave them white. Many people do like white drapes.

Window Treatments for the Z-scale Ranch House No. 1 Kit.

Cut out the drapes, and glue them in place using white glue.

Gluing the Window Treatments in Place for the Z-scale Ranch House No. 1 Kit.

Now that the windows are fully dressed, cut a section of the kit label or some other material to make a view block. We certainly do not want people looking straight through the house.

Gluing the Window Glazing in Place for the Z-scale Ranch House No. 1 Kit.

Glue it in place.

Gluing the Window Glazing in Place for the Z-scale Ranch House No. 1 Kit.

Next page: Part 9 - Finishing Touches